Bind Commands

This command activates the ALT1 (left ALT) key on your keyboard (the same as holding down the ALT key). Use -alt1 to deactivate.

This command activates the ALT2 (right ALT) key on your keyboard (the same as holding down the ALT key). Use -alt2 to deactivate.

This console command causes you to attack repeatedly. Use the command -attack to stop this. If you have a gun equipped while using this command it will make you fire until you need to reload.

This command will activate your secondary attack repeatedly. To stop this, use the -attack2 command. For example, this command makes you scope in with an AWP, or stab if you have your knife out.

This command will make your character move backwards continuously. Type -back into your console to disable this.

This movement console command will make your character crouch, similarly to how holding the left CTRL key on a keyboard works. -duck will make you stand up again.

This movement command makes your character move forward infinitely. Use -forward to disable this.

This console command allows you to use a joystick to move your camera.

This movement command causes your character to jump once into the air. It will also unbind your jump key, so enter -jump into your console to fix this.

This command prevents you from being able to move forward with your keyboard. Use the -klook command to disable it.

This command causes your camera to endlessly rotate in a left direction. Using the -left command will end the cycle.

This command only works in noclip mode and in demos: this command will make you (or your free-roam camera in demos) move downwards. Use -movedown to stop moving downwards.

This command will make your character move to the left. The -moveleft console command will stop your character from moving to the left after running this command.

This command will make your character move to the right. The -moveright console command will stop your character from moving to the left after running this command.

This command only works in noclip mode and in demos: this command will make you (or your free-roam camera in demos) move upwards. Use -moveup to stop moving upwards.

This command will prompt your character to reload their weapon if any bullets have been fired, and if not deactivated, will cause your character to reload instantly after firing a single bullet. Deactivate this command with the -reload command.

This command makes your camera spin endlessly to the right. Using the command -right will stop this effect.

This command will make the in game scoreboard appear. Unlike holding TAB, it will stay on your screen without you needing to press anything. Disable it with the -showscores command.

This console command will slow down the movement speed of your character. Type the command -speed to return your movement speed back to normal.

This command prevents your mouse from being able to adjust where your player model is looking. Instead, your mouse will cause you to move to the side, or strafe. Turn this off with the -strafe command.

This command will prompt you to perform the "use" action on an item or object if its applicable. For example, this command will make you plant the bomb if you're on a bombsite carrying the bomb when you use it. It can also open doors if you're in front of one. It acts in a similar way to the E key on a default keyboard setup. Use the -use command afterwards, as otherwise you will not be able to use this command again.

This a useful console command that, when activated, will start continuously transmitting what you say to your teammates in game, meaning you don't need to hold down a mic hotkey. The command -voicerecord disables this command and stops transmitting what you say to your team. Check our examples for a way to bind this to a key.

This command was removed from the game as it allowed players to move up ladders at full speed silently.

This command will make make your AWP, or any other weapon with a scope (e.g. scout) scope in. The weapon will continue to be scoped in/out until the command -zoom is used. The command may activate the "zoom" feature of other weapons like the stab of a knife or the burst fire switch of the glock.

This command will deactivate the alt1 key, which is usually activated with the +alt1 command.

This console command stops the action that the command +alt2 commands.

This is the command needed to stop firing or attacking if you've the +attack command.

This is the command you need to stop the infinite attack cycle that +attack2 causes, such as repeatedly stabbing if you have your knife equipped.

Using this console command stops your character walking backwards if you previously used the +back command.

If you're crouched, this cheat command will make you stand back up.

This is the command to use to stop your character walking forward if you've got them in an endless movement cycle.

This cheat command will dismiss the statistics graph that can be summoned by using the +graph command.

This command will deactivate the +movedown command (will stop you or your camera from moving downwards).

This cheat command stops your character from moving if they've been set to move endlessly to the left.

This command prevents your character from moving any further if they've been set to move endlessly to the right.

This command will deactivate the +moveup command (will stop you or your camera from moving upwards).

This command will deactivate the +reload command (as after using the +reload command, you will instantly reload after firing any bullets).

This console command stops your camera from spinning in circles if you've set it to rotate endlessly to the right.

This command hides the CS:GO scoreboard if you brought it up with a command like +score.

This command dismisses the scoreboard if you've brought up it permanently through a command like +showscores or +score.

This command will return the speed of your character back to running speed/normal if you've slowed it down with a command like +speed.

This command disables the effect from the +strafe command, where your mouse will move your character sideways rather than look around with the camera.

If you have previously used the +use command, you must run this command after (to deactivate it), so that you can use the +use command again.

This console command will stop transmitting voice communication if you've used a command that lets you communicate without holding down a hotkey. Check the examples for a bind to toggle between transmitting voice and not doing so.

This command breaks the infinite loop cycle of scoping in and out on a scoped weapon like the AWP or stabbing with your knife that +zoom causes.

If you have set up an autobuy command with the cl_autobuy command then this command will attempt to purchase those items.

This command will bind a command, or list of commands, to a key on your keyboard or button on your mouse. Binds can make your CS:GO experience much more convenient, and is a very important command in the game.

This command will bind a command, or list of commands, to a key on your keyboard or button on your mouse. This command is for OSX (Mac).

This command assigns a hotkey (key on your keyboard, or button on your mouse) to switch through the various values a specified console command has (when pressed or clicked). This is useful for setting up binds that toggle a certain feature. For example,"voice_enable" would be toggled between 0 and 1 (disabled and enabled).

This command brings up the option to call a vote in game, either to kick a player or to change map. You can select which vote you're calling after entering the command, and if the vote you call then receives a large majority of player votes to one side or another that decision is forced (e.g. the player you're voting to kick would be kicked if the large majority of players voted yes).

This command allows you to change what key turns mouse selection on while you have the scoreboard open . This is defaulted to +attack2 (usually right-click), and is what lets you use your mouse to click on people's names when you toggle open the scoreboard.

This command doesn't work as intended. It should bind a specified command to a random (but unused key). Use with caution.

This command switches to the next item in your inventory. If you have your rifle equipped it will swap to your pistol, and if you have your pistol equipped it will swap you to your knife.

This command switches what you have equipped to the next grenade in your inventory. That means if your rifle is drawn you will switch to a grenade, and then using the command again will cycle you through to the next available grenade on you.

This command switches to the next item in your inventory. This does not include guns, so will move between items such as your knife and grenades only.

This command equips the next item in your inventory that isn't a grenade. It also ignores knives, so will only switch between the guns you have in your inventory.

This command works backwards through your inventory, equipping you with the item that is the previous selection of what you currently have out. That means that using this command when you have your knife out equips your pistol, and using it with your pistol out equips your rifle (if you have one).

This console command produces a list in your developer console of what certain keys are bound to, such as the B key on your keyboard being bound to opening the buy menu.

This console command lists all of the keys and buttons you have that have a specific action bound to them (e.g. the space bar being bound to jump).

This command switches your active slot (what you are holding in your hand) to slot 0.

This command switches your active slot (what you are holding in your hand) to slot 1.

This command switches your active slot (what you are holding in your hand) to slot 10.

This command switches your active slot (what you are holding in your hand) to slot 11.

This command switches your active slot (what you are holding in your hand) to slot 2.

This command switches your active slot (what you are holding in your hand) to slot 3.

This command switches your active slot (what you are holding in your hand) to slot 4.

This command switches your active slot (what you are holding in your hand) to slot 5.

This command switches your active slot (what you are holding in your hand) to slot 6.

This command switches your active slot (what you are holding in your hand) to slot 7.

This command switches your active slot (what you are holding in your hand) to slot 8.

This command switches your active slot (what you are holding in your hand) to slot 9.

This command removes any bind bound to the specified key.

This command removes all binds from all keys. Note that this will remove binds from keys like W, A, S and D, so you won't be able to move until re-binding.